|
 |
|
|
WMRK
Series Multi-Vendor
Server Enclosure |
|
 |
| Optimized for use with servers from leading manufacturers
|
|
- Standard front and rear adjustable cage nut style rail with Z-rail adaptors to accommodate most server-slide kits
- UL Listed in the US and Canada
- Fully welded construction provides:
- Static load capacity: 10,000 lbs.
- UL Listed load capacity: 2,500 lbs.
- Seismic Certified load capacity: 1,090 lbs.
- Seismic certified to the following codes and standards: 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) "D". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 1,090 lbs. when used with WMRK-Z4 seismic floor anchor brackets.
- 24" overall width optimized for use on raised floors
- Z-rail adaptors accommodates most server-slide kits
- Configured for passive thermal management
- Designed to allow fully integrated racks to be ganged
- Removable split bottom rear panel allows cable bundles to be easily passed over or under the WMRK's key-locking split rear doors (standard on configured racks only)
- Rack top includes five integral gland grommeted 4" cable pass-through (48" depth includes seven cable pass-throughs)
- Stud in base of rack facilitates the proper grounding and bonding of electronic equipment, as per NEBS and NEC standards
- Configured models include:
- 70% vented locking front door
- 79% vented locking split rear door
- 20 amp power strip (20 outlets for 42 space models; 10 outlets for 24 space models)
- Face mounted temperature monitoring module with local and remote notification
- 42 space model shall additionally include 3-1/4" width vertical lacing strip
- Non-configured models do not include a rear door
|
The configured WMRK Series multi-vendor server rack ships fully outfitted to address the thermal, cable and power needs of a server installation |
|
|
| |
|
|
|
|
|
Monitor enclosure temperature with this included TEMP-DEC temperature display (configured models) |
|
Vented top includes five gland grommets (seven for 48" depth racks) to protect cables entering the enclosure |
|
42 space configured models include a vertical lacer strip with a unique design that allows for easy installation of pre-assembled cable bundles |
|
| Configured Models |
|
| |
WMRK
w/ Sides,
36" Outside Depth,
33-1/2" Useable Depth |
WMRK
without Sides,
36"
Outside Depth,
33-1/2" Useable Depth |
WMRK w/ Sides,
42" Outside Depth,
39-1/2" Useable Depth |
WMRK without Sides,
42" Outside Depth,
39-1/2" Useable Depth |
Racking
Height |
Overall
Height |
| WMRK-4236SVR |
WMRK-4236SVR-AB |
WMRK-4242SVR |
WMRK-4242SVR-AB |
73-1/2" (42 space) |
79-5/8" |
| WMRK-2436SVR |
WMRK-2436SVR-AB |
- |
- |
42" (24 space) |
48-1/4" |
|
| Rack Only |
|
| |
WMRK
36" Outside Depth,
33-1/2" Useable Depth |
WMRK
42"
Outside Depth,
39-1/2" Useable Depth |
WMRK
48" Outside Depth,
45-1/2" Useable Depth |
Racking
Height |
Overall
Height |
| WMRK-4536 |
WMRK-4542 |
WMRK-4548 |
78-3/4" (45 space) |
85" |
| WMRK-4236 |
WMRK-4242 |
WMRK-4248 |
73-1/2" (42 space) |
80" |
| WMRK-2436 |
WMRK-2442 |
- |
42" (24 space) |
48-1/2" |
|
| WMRK
Additional Rail Kits |
|
|
11-gauge, cage-nut, sold in pairs. All mounting hardware included.
Cage
Nut style rackrail
|
Part # |
Description |
|
PROWMRK-RR45 |
pair 45 space
additional cage nut rackrail |
|
PROWMRK-RR42 |
pair 42 space
additional cage nut rackrail |
| PROWMRK-RR24 |
pair 24 space
additional cage nut rackrail |
|
HP-6MM hardware sold separately |
PROWMRK-RR42
(shown with cage nuts) |
|
| Z-Rail Adaptor |
|
|
Z-rail adaptors convert standard rackrail to "Z" style rail for side mounted applications
| Part # |
Description |
| PROWMRK-ZRA-45 |
45 space Z-rail adaptor (2 pcs.) |
| PROWMRK-ZRA-42 |
42 space Z-rail adaptor (2 pcs.) |
| PROWMRK-ZRA-24 |
24 space Z-rail adaptor (2 pcs.) |
| CN6MM |
100 qty. 6mm cage nuts |
| HP-6MM |
100 qty. 6mm Phillips head rack screws |
|
PROWMRK-ZRA-42
|
 Rack Ruler simplifies rackspace math. |
| Side Panels |
|
|
Split side panels easily lift on and off and include an internal locking kit.
| Rack Part # |
Split Side Panels Part # |
| WMRK-4536 |
SPN-45-36 |
| WMRK-4542 |
SPN-45-42 |
| WMRK-4548 |
SPN-45-48 |
| WMRK-4236 |
SPN-42-36 |
| WMRK-4242 |
SPN-42-42 |
| WMRK-4248 |
SPN-42-48 |
| WMRK-2436 |
SPN-24-36 |
| WMRK-2442 |
SPN-24-42 |
|
Split Side Panels for the WMRK Series
|
| Rack Ruler simplifies rackspace math. |
| Caster and Plenum Bases
|
|
|
-
Caster base allows the rack to be wheeled into place, then raised via leveling feet
-
Caster and Plenum bases accept a variety of 19” panels for cable and thermal management
-
Includes one 4 space and one 2 space panel
| Rack Part # |
Commercial Grade Caster Bases |
Plenum Bases |
Top Opening |
| WMRK-xx36 |
CBS-WMRK-36 |
PBS-WMRK-36 |
17-1/2" (10 spaces) |
| WMRK-xx42 |
CBS-WMRK-42 |
PBS-WMRK-42 |
24-1/2" (14 spaces) |
| WMRK-xx48 |
CBS-WMRK-48 |
PBS-WMRK-48 |
31-1/2" (18 spaces) |
|
Caster and Plenum bases accept a number of 19" panels for cable and thermal management
|
| Rack Ruler simplifies rackspace math. |
|
|
|
|
|
|
#96-01079 
