|
 |
|
|
| AXS
System for Millwork and In-Wall |
 |
| |
Gain Unrestricted Rear Access to Equipment
& Cabling |
|
|
  |
- Pull-out frame rack saves time & reduces labor
- Frame heights range from 10 sp. (17.5") or 15
sp. (26.25") to 43 sp. (75.25")
- Available in 16", 20" or 26" depths
- Available in 2 extension lengths: 25" or 48"
- 650 lb. weight capacity with proper distribution
- Mechanically interlocking corner for exceptional
strength
- Heavy-duty 13-gauge steel top & bottom
- 2 pairs fixed-position 11-gauge threaded 10-32 front
& rear rackrail
- Cable Management Tray provides additional capacity for large cable bundles
- Brush Gasket fills unsightly gaps that may appear between the rack and custom millwork (requires a rough-in width of 19-5/8")
- Finished in a durable black powder coat
- Full-depth
front & rear mount AXS rack shelf available
|
|
|
| |
|
|
ventilated top accepts
up to 2 fans |
ORDERING INFORMATION
FOR MILLWORK, CUSTOM CABINET, OR IN-WALL
| Part # |
|
Extension Length |
Frame Depth |
Millwork Opening Depth |
|
AXS-xx-26 |
Replace 'xx' with the # of useable spaces (15 to 43 spaces) |
48" |
26" |
28.5" |
|
AXS-xx |
Replace 'xx' with the # of useable spaces (15 to 43 spaces) |
48" |
20" |
22.5" |
|
AX-SX-xx |
Replace 'xx' with the # of useable spaces (10 to 43 spaces) |
25" |
20" |
22.5" |
|
SAX-xx |
Replace 'xx' with the # of useable spaces (15 to 43 spaces) |
48" |
16" |
19" |
|
SSAX-xx |
Replace 'xx' with the # of useable spaces (10 to 43 spaces) |
25" |
16" |
19" |
|
The following is included
w/ each of the above
| Qty |
Items Included |
| 1
|
rack frame in specified height
[A] |
| 2 |
triple hinged cable carriers [B] |
| 1 |
internal system base [E] |
| 1 |
top restraining leash [F] |
| 1 |
assembly hardware kit |
SERVICE TRACKS & SERVICE STAND REQUIRED FOR INSTALLING
AND SERVICING
Service Tracks [C]
-A pair of removable service tracks
Part
#
(Pair) |
Use with |
Track
Length |
Rack
Frame
Extension Length |
|
TRACK50 |
AXS, SAX,
AXS-xx-26 |
50"
|
48" |
|
TRACK25* |
AX-SX, SSAX |
25"
|
25" |
*TRACK25 can only be used with AX-SX and SSAX short extension
system
Service Stand [D]
-removable telescoping stand that supports and levels the service tracks
| Part
# |
Height range off
the floor |
|
TRACKL |
2.25" to 3.25" |
|
TS310 |
3" to 11" |
|
TS1022 |
10" to 22" |
|
TS1640 |
16" to 40" |
|
|
Power Compatibility
Chart
| Power
Strip - AXS, AXS-xx-26, AX-SX, SAX, SSAX racks |
|
|
10 space and up |
|
|
17 space and up |
|
21 space and up |
|
|
25 space and up |
|
|
35 space and up |
|
|
41 space and up |
NOTE: When mounting vertical power strips, part # PB-5A is required.
 also mounts with part PB-XS |
Accessories
These fan kits have been designed specifically to fit the AXS, and include special hardware that will not protrude past the top of the AXS, or into the first rackspace.
Part
# |
Description |
|
AXS-FAN |
slim-fan for AXS rack |
AXS-FAN-K |
2 slim-fans for AXS rack |
|
AXS-WT Cable Management Tray
Mounts between cable carriers of any AXS Series slide out rack (non-rotating only) to provide additional capacity for large cable bundles.
Part # |
Fits |
|
AXS-WT50 |
AXS, SAX |
|
AXS-WT25 |
AX-SX, SSAX |
|
 |
Brush Gasket and Guide Kit
Black Brush Gasket fills unsightly gaps that may appear between the rack and custom millwork. The Guide Kit includes the Brush Gasket and helps center the rack while protecting millwork. Both require a rough-in width of 19-5/8"
Part # |
Description |
Fits* |
BG17 |
17' Brush Gasket |
AXS-xx-26, AXS-xx, AX-SX-xx, AXS-SXR, SAX-xx, SSAX-xx |
AXS-GG16 |
Guide Kit with Brush Gasket |
SAX-xx, SSAX-xx |
AXS-GG20 |
Guide Kit with Brush Gasket |
AXS-xx, AX-SX-xx, AXS-SXR |
AXS-GG26 |
Guide Kit with Brush Gasket |
AXS-xx-26 |
*suffix rack part number with -GG to include Brush Gasket and Guide Kit |
 |
|
|
|
|
|
|
