Middle Atlantic Power Products - AXS system for millwork and in-wall

Rotating AXS System for Millwork and In-Wall

Provides Enhanced Rear Access to Equipment and Cabling

click to enlarge

Slide Out rack frame rotates for equipment servicing
Simplifies installation of larger electronics systems in cabinet
Frame heights range from 15 sp. (26-1/4") to 43 sp. (75-1/4")
20" useable depth
450 lb. weight capacity with proper weight distribution
Integral cable management system provided
Brush Gasket fills unsightly gaps that may appear between the rack and custom millwork (requires a rough-in width of 19-5/8")
Guide Kit includes the Brush Gasket and helps center the rack while protecting millwork (requires a rough-in width of 19-5/8").
Locks closed with included hardware

	ventilated top accepts up to 2 fans

	Pre-installed washers on all 10-32 threaded rackscrews save installation time.		click for more

	#96-01000 Download or view PDF file
	Instructions #I-00073 Download or view PDF file

ORDERING INFORMATION FOR MILLWORK, CUSTOM CABINET, OR IN-WALL

Part #		Extension Length	Frame Depth	Millwork Opening Depth
AX-SXR-xx	Replace 'xx' with the # of useable spaces (15 to 43 spaces)	31"	20"	25.5"

The following is included w/ each of the above

Qty	Items Included
1	rotating rack frame in specified height [A]
1	internal system base [B]
1	cable management system [E]

SERVICE TRACKS & SERVICE STAND REQUIRED FOR INSTALLING AND SERVICING
Service Tracks [C]
-A pair of removable service tracks

Part # (Pair)	Use with	Track Length	Rack Frame Extension Length
TRACK31	AX-SXR-xx	31"	31"

Service Stand [D]
-removable telescoping stand that supports and levels the service tracks

Part #	Height range off the floor
TRACKL	2.25" to 3.25"
TS310	3" to 11"
TS1022	10" to 22"
TS1640	16" to 40"

Power Compatibility

Recommended Power Chart
	10 space and up
	17 space and up
	21 space and up
	25 space and up
	35 space and up
	41 space and up

NOTE: When mounting vertical power strips, part # PB-5A is required.

also mounts with part PB-XS

Accessories
These fan kits have been designed specifically to fit the AXS, and include special hardware that will not protrude past the top of the AXS, or into the first rackspace.

Part #	Description
AXS-FAN	slim-fan for AXS rack
AXS-FAN-K	2 slim-fans for AXS rack

Brush Gasket and Guide Kit
Black Brush Gasket fills unsightly gaps that may appear between the rack and custom millwork. The Guide Kit includes the Brush Gasket and helps center the rack while protecting millwork. Both require a rough-in width of 19-5/8"

Part #	Description	Fits*
BG17	17' Brush Gasket	AXS-xx-26, AXS-xx, AX-SX-xx, AX-SXR, SAX-xx, SSAX-xx
AXS-GG16	Guide Kit with Brush Gasket	SAX-xx, SSAX-xx
AXS-GG20	Guide Kit with Brush Gasket	AXS-xx, AX-SX-xx, AX-SXR
AXS-GG26	Guide Kit with Brush Gasket	AXS-xx-26