• UL Listed in the US and Canada
• Numbered rackspace increments speed equipment mounting
• Fully welded construction provides:
  • Static load capacity: 10,000 lbs.
  • UL Listed load capacity: 2,500 lbs.
  • Seismic Certified load capacity: 900 lbs.
• Seismic certified to the following codes and standards: 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) "D". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 900 lbs. when used with WRK-Z4 seismic floor anchor brackets.
• Generous 24-1/4" OD width provides room for cables
• 1/2", 3/4", 1" and 1-1/2" electrical knockouts found on removable split rear plates, top knockout plate additionally includes UHF/VHF antenna knockouts
• Available in 2 depths: 27-1/2" or 32-1/2"
• Cable pass-throughs located in the face of the standard front and rear adjustable 11-gauge, 10-32 threaded, extra-wide rackrail facilitate the passing of cable from the face of the equipment to the rear
• Laser-cut 1/8" thick internal steel braces for strength
• 14-gauge steel tops & bottoms, 16-gauge seamless steel sides
• Stud in base of enclosure facilitates the proper grounding and bonding of electronic equipment, as per NEBS and NEC standards
• Configurable open top accepts a number of top options
• Standard locking rear door incorporates spring loaded latch to keep door closed without key
• Finished in a durable black textured powder coat
• Also available in putty powder coat finish
• Available with furniture grade top

Click HERE to Download the Thermal Management White Paper

• universal cabinet options
• PDT thin power strips
• cable lacing bars
• security doors
• equip. mounting hdwr.
• rack base templates
• WRK-24MDK presentation enclosure system

WRK-24MDK studio enclosure system combines furniture elegance with a robust rolling steel enclosure in a deep video rack.
Incorporating an attractive graphite-speckled top that can accommodate large video monitors, the WRK-24MDK comes with a skirted wheel-base, latching front plexi door, and latching vented rear door. Improved rear door accepts new cooling fan options.