|
 |
|
|
| Crating
Service |
|
 |
|
Reusable economical transport protection for any steel rack enclosure. Removable front and rear panels allow loading and testing of racks while still in the crate. Truck transit tested; ship racks and equipment around the corner or around the country.
NOTE: When ordering CRATE, please specify the rack it is for as well as any options to be installed such as caster bases, side panels, etc. that increase the size of the crate needed. CRATE is a custom item and cannot be canceled once ordered.
|
|
Seismic Floor Anchor
Brackets |
|
| |
When properly installed, seismic floor anchor kits bring any seismic certified BGR, DRK, WRK, WMRK, MRK, VRK, ERK SC, SCQ, SCRK and SCQRK Series enclosure to Seismic Design Category ‘D’, Zone 4 and Seismic Use Group III upper floor essential equipment rating and have an Ip rating of 1.5. Includes four brackets.
| Part # |
Fits |
| BGR-Z4 |
BGR, BGR-SA Series |
| BGR-ISO-Z4 |
BGR, BGR-SA Series (Isolation bracket) |
| WRK-Z4 |
WRK
series |
| MRK-Z4 |
MRK, VMRK, DRK
series |
| WMRK-Z4 |
WMRK Series
series |
| VRK-Z4 |
VRK
series |
| ERK-Z4 |
ERK
series |
| SC-Z4 |
SC, SCQ, SCRK, SCQRK
series consoles |
|
 |
Document Pocket |
|
| |
Store wiring diagrams,
schematics, and other vital documents in this convenient steel holder.
Fits rear doors of all Middle Atlantic racks. Flush mounting studs included,
black powder coat finish.
|
|
Copper Buss Bars |
|
| |
Our solid copper bus bars are 1/8" thick x 2" wide, and threaded 10-32. Various heights and widths available. Supplied mounting hardware includes nylon isolation washers, bolts and nuts.
|
Part # |
Racking
Height |
Width |
Quantity |
| BB-5254-1 |
79" |
1" |
1
bar |
| BB-44-1 |
77" (44 space) |
1" |
1
bar |
| BB-40 |
70" (40 space) |
2" |
1
bar |
| BB-12 |
21" (12 space) |
2" |
1
bar |
|
|
Vertical Lacer Strips |
|
| |
Perforated steel lacer strips mount vertically to rackrail brackets and provide many locations for securing cable ties. Lacer strips can be cut down easily to smaller sizes. LACE-OWP and LACE-OP strips feature tie posts for sliding on pre-wrapped cable bundles using cable ties or up to 3/4" wide Velcro® straps. Some lacer strips also accept cage nuts or mounting of select power strips for increased versatility.
| Part # |
Description
|
Qty
|
Compatible
Options
|
Cable
Ties
|
TSW-15
|
TW12
|
Cage
Nuts
|
| LACE-5254-OWP* |
4-3/4" width, 52-54 space w/ tie posts 6 |
6
|
|
|
|
|
| LACE-44-OWP* |
4-3/4" width, 44 space w/ tie posts |
6
|
|
|
|
|
| LACE-40-OWP* |
4-3/4" width, 40 space w/ tie posts |
6
|
|
|
|
|
| LACE-23-OWP* |
4-3/4" width, 23 space w/ tie posts |
6
|
|
|
|
|
| LACE-13-OWP |
3-1/4" width, 13 space w/ tie posts |
6
|
|
|
|
|
| LACE-5254-OP |
3-1/4" width, 52-54 space w/ tie posts 6 |
6
|
|
|
|
|
| LACE-44-OP |
3-1/4" width, 44 space w/ tie posts |
6
|
|
|
|
|
| LACE-40-OP |
3-1/4" width, 40 space w/ tie posts |
6
|
|
|
|
|
| LACE-37-OP |
3-1/4" width, 37 space w/ tie posts |
6
|
|
|
|
|
| LACE-23-OP |
3-1/4" width, 23 space w/ tie posts |
6
|
|
|
|
|
| LACE-13-OP |
3-1/4" width, 13 space w/ tie posts |
6
|
|
|
|
|
| LACE-44LP |
3-1/2" width, 44 space w/ raised lances |
6
|
|
-
|
|
-
|
| LACE-44LP |
3-1/2" width, 44 space w/ raised lances |
6
|
|
-
|
|
-
|
| LACE-37LP |
3-1/2" width, 37 space w/ raised lances |
6
|
|
-
|
|
-
|
| LACE-P |
2" width, 45 space, 1/8" thick w/ round holes |
6
|
|
|
-
|
-
|
| LACE-37P |
2" width, 37 space, 1/8" thick w/ round holes |
6
|
|
|
-
|
-
|
| LACE-13P |
2" width, 13 space, 1/8" thick w/ tie posts |
6
|
|
|
-
|
-
|
| LACE-44-1SP |
1" width, 44 space w/ 10 tie saddles |
6
|
|
included
|
|
-
|
| LACE-37-1SP |
1" width, 37 space w/ 10 tie saddles |
6
|
|
|
|
-
|
| LACE-5254-1P |
1" width, 52-54 space tapped for tie saddles 6 |
6
|
|
|
-
|
-
|
| LACE-44-1P |
1" width, 44 space tapped for tie saddles |
6
|
|
|
-
|
-
|
| LACE-37-1P |
1" width, 37 space tapped for tie saddles |
6
|
|
|
-
|
-
|
*NOTE: Also accepts mounting of PD Slim and PDT Series vertical power
|
|
|
TSW-15 tie saddles (qty. 15) |
|
TW12 Velcro® cable strap (qty. 12)
|
|
|
Rack Isolation Kit |
|
| |
When installing
racks and associated equipment in an isolated ground environment, it is
important to isolate the rack from all conductive flooring materials.
Our Rack Isolation Kit provides a convenient method to accomplish this.
The kit consists of eight 4" long strips of 1/8" thick non-conductive
material which are attached to the rack base and prevents floor contact.
| Part # |
Description |
ISO-1 |
poly-carb rack isolation kit |
MV-ISO-31 |
MRK/VRK/MRK/VMRK to RIB iso kit, 31" deep, includes isolation hardware |
MV-ISO-36 |
MRK/VRK/MRK/VMRK to RIB iso kit, 36" deep, includes isolation hardware |
MV-ISO-42 |
MRK to RIB iso kit, 42" deep, includes isolation hardware |
#96-981 Download
or view PDF file |
|
| Electrical Isolation Knockout Panel |
|
| |
Featuring multiple electrical knockouts, the Electrical Isolation Knockout Panel is ideal for installations that require electrical conduit to be isolated from the enclosure and replaces the standard rear electrical knockout plate. Installs in top of bottom of MRK, WRK, DRK, ERK, SCRK and ISRK Series enclosures, and the bottom of 60-degree SC and SCQ Series consoles. Constructed from 1/8" thick non-conductive Lexan. Hardware included.
| Part # |
Description |
ISO-KOP |
electrical isolation knockout panel |
|
ISO-KOP features pairs of 1-1/2", 1", 3/4", and 1/2" EKO's |
Leveling Feet |
|
| |
Adjustable leveling feet fit EGR, ERK, WRK, WRK-SA, VMRK, DRK and MRK racks and enclosures. Isolation leveling feet also available with protective rubber cover to isolate racks from the floor. Leveling feet also work with caster bases for MRK, WRK and DRK Series racks. Raises enclosure from 1/8" to 1" off of floor. Set of four.
|
Part # |
Description |
LF |
Leveling feet - set of four |
LF-ISO |
Isolation leveling feet - set of four |
|
 LF |
LF-ISO |
Door Latch |
|
| |
Can be user-installed
in place of a keylock on all of our doors.
|
|
SPIKE Rack Bonding Kit (Patent Pending) |
|
| |
- Eliminate bonding straps between racks, while providing lowest impedance ground possible
- Self-piercing at bonding points – no need to remove paint
- Displaces paint without compromising the corrosion protection of the
painted surface eliminating the need for anti-oxidizing protection products
required by other bonding methods
- Handy installation tool provided to ensure ease of installation and proper torquing
|
Part # |
Description |
|
BOND-G24 |
24 sets of rack bonding/ganging hardware |
|
|
Ganging Hardware |
|
| |
Time-saving ganging
hardware provides easy field alignment and joining of our multi-bay enclosures.
Available hardware includes drift pins, 1/2" magnetized sockets and
enough 5/16" flange nuts and bolts to gang up to 10 racks. GANG-10T includes bolts only (nuts not required). GANG-10T and TDRIFT are for the BGR series only.
|
Part # |
Description |
|
DRIFT |
Set
of two drift pins |
|
MAG-1/2 |
Set
of two 1/2" magnetic sockets |
|
GANG-10 |
5/16"
nuts/ bolts to gang 10 racks |
|
TDRIFT |
Set of two drift pins (BGR only) |
|
GANG-10T |
Bolts for ganging 10 racks (BGR only) |
|
|
Wrinkle Touch-Up
Paint |
|
| |
Black wrinkle touch-up
kit is ideal for small nicks incurred during and after installation. Includes
paint and applicator.
|
|
Putty Touch-Up Paint |
|
| |
Putty touch-up kit
is ideal for small nicks incurred during and after installation. Includes
paint and applicator.
|
|
Top Rail Option |
|
| |
Ideal for mounting
panels or equipment in the top openings of our racks, our top rail option
includes a pair of 11-gauge, 10-32 threaded rack rail, mounting angles,
and hardware. When installed, top rail is recessed 1/8" from top
of rack.
|
Part # |
Fits |
Racking
Space |
|
MW-TR |
DRK, MRK, VRK, VMRK, WRK, and WR series |
22-3/4"
(13 space) |
|
|
|
|
|
|
|
