Modular Power Raceway System - Enhanced!

Design And Build Your Own Custom Power Strip Using Off-The-Shelf Components
   
    
   

Need a custom power strip fast? With the enhanced MPR Series, you can design and build a custom power distribution system to your specifications! As easy to configure in the field as it is in the shop, our new modular power system provides the broadest selection of circuit and control options, and utilizes a proprietary pre-terminated interconnect system that snaps together in a fraction of the time it takes to custom hard wire other raceway products.

The MPR series is comprised of power modules, raceways, interconnect cables, and a sequencing controller. The concept is to mix and match power modules appropriate for each application.

You Design It - simply select the number of circuits and amperage/outlets required, and choose the appropriate modules for the job. Decide whether to use our flexible sequencing control system or use any control system that provides contact closure outputs.

You Build It - use our pre-terminated cables to connect modules and install the modules in the appropriate raceway.

Easy Installation - raceways install quickly into racks utilizing our unique "quick-clip" mounting method.

#96-959 Download or view PDF file
How to Order
A fully configured raceway consists of at least four components:
  • one MPR raceway - accepts 3, 6, 8, or 9 MPR modules
  • one or more MPR modules - provides 1 or 2 duplex outlets per module
  • J series AC jumpers - interconnects same-circuit modules
  • at least one T series tail - connects raceway circuit to main power
For example:
If the system requires a raceway (Updated!) that contains 4 remote sequenced 20 Amp outlets, 8 remote sequenced and always on 15 amp and 20 Amp outlets on a second circuit, and local switch sequence control is needed, the following should be ordered:
  • [A] (1) MPR-6 raceway
  • [B] (2) RLM-20 20 Amp modules
  • [C] (1) M-20 20 Amp module
  • [D] (1) RLM-15 15 Amp module
  • [E] (2) M-15 15 Amp modules
  • [F] (4) J-12X6 jumpers (sold in packs of 6 - 4 required)
  • [G] (1) T-24X6 connector with tails (sold in packs of 6 - 1 required)
  • [H] (1) T-80X6 connector with tails (sold in packs of 6 - 1 required)
for more info on raceways, click HERE

Power Modules - Updated!  

Switchable power modules allow quick and easy shop or field wiring of vertical power raceways. A complete selection of 15 Amp, 20 Amp and NEW! 30 Amp modules allows the installer to configure each raceway to fit an application, with single or multiple circuits and a choice of control options. Powered through 115 VAC 60Hz input voltage, all modules utilize a unique, #12 (20 Amp) wire with genderless 30 Amp coupler to daisy-chain AC power to other modules on the same circuit. Modules fit MPR Series raceways, are manufactured from 18-gauge steel and feature a durable black powder coat finish.
Stand-Alone Part #
Part #
Amperage
Control
Status
RLM-15-1C
RLM-15
15
contact closure, local switch
LED and contact closure
RLM-20-1C
RLM-20
20
contact closure, local switch
LED and contact closure
RLM-20IG
20/ isolated ground
contact closure, local switch
LED and contact closure
RLM-15
RLM-20
RLM-20IG
 
Part #
Amperage
Control
Status
 Circuits
M-15
15
always on
none
 1
M-20
20
always on
none
 1
M-20IG
20/ isolated ground
always on
none
 1
M-2X15 NEW!
15
always on
none
 1 or 2
M-2X20 NEW!
20
always on
none
 1 or 2
M-2X20IG NEW!
20/ isolated ground
always on
none
 1 or 2
M-30TL-HW NEW!
30/ hard wired
always on
none
 1
M-15
M-20
M-20IG
Click here for a listing of
Stand-Alone 30 Amp power modules.
RLM-20-1C
 
       
M-2X15
M-2X20
M-2X20IG
M-30TL-HW
J Series Jumpers
J series jumpers connect power modules, providing AC power to all modules on the same circuit.
Pre-terminated jumpers feature convenient genderless 30 Amp connectors at both ends and are sold in packs of six.		  
Part #
Jumper Length
Termination
Qty
J-12X6
12"
connector on each end
sold in packs of 6
J-24X6
24"
connector on each end
sold in packs of 6
J-72X6
72"
connector on each end
sold in packs of 6
* UL file #E221245
J-12X6
Master / Slave Jumper for Power Modules
Allows M Series slave modules to be switched remotely by an RLM Series Master Module.  
Part #
Jumper Length
Qty
JMS-12X6
12"
sold in packs of 6

JMS-12X6
T Series Tails
T series tails connect incoming power to a single circuit within a raceway. One tail required per circuit. Each tail features a pre-terminated 30 Amp connector that plugs in to a module at one end, and wire tails for J-box
connection on the other. Sold in packs of six.		  
Part #
Jumper Length
Termination
Qty
T-24X6
24"
connector on one end, tails on the other
sold in packs of 6
T-80X6
80"
connector on one end, tails on the other
sold in packs of 6
* UL file #E221245
T-24X6

FC Series Thermostatic Fan Control - UPDATED!
Proportional speed thermostatic fan control extends both equipment and fan life and reduces service calls by varying the fan speed of up to four fans, based on the temperature within the enclosure.

Featuring three temperature ranges, the fan control can be set to activate proportional to the enclosure temperature, or to come on at full power whenever the temperature threshold is reached.

The NEW FC-2-215-1C includes two NEMA 5-15R 15 Amp outlets.



FC-4-1C

NEW! FC-2-215-1C
with 2 15 Amp outlets
Part #
Description
# of Fan
Outlets
FC-4
 mounts in MPR Series raceways 4
FC-4-1C
 mounts to rackrail brackets or any flat surface 4
FC-2-215-1C
 mounts to rackrail brackets or any flat surface, includes two 15 Amp outlets 2

#96-980 Download or view PDF file

MPR-SS Surge Suppressor
  MPR-SS transient voltage surge suppressor provides protection for MPR Series modules when mounted in raceways. Mounts in integral J-Box with supplied double-stick tape, use one per circuit.
Part #
Description
MPR-SS
MPR surge suppressor, single circuit

G-8X10 Ground Wires
  Set of ten 8” ground wires with termination rings simplifies attachment of multiple ground wires to the grounding stud.

NEW! G-8X10 ground wires
Part #
Description
G-8X10
ten 8” ground wires

Ground wires used in an MPR application


©copyright 2000-2005 Middle Atlantic Products, Inc.