Telescoping Lacer System

 
  • Adjusts to fit front to rear or horizontally within any Middle Atlantic Products enclosure
  • Provides for effective cable management and cable strain relief
  • Accepts mounting of vertical lacer strips and thin power strips for a complete cable management system





Part #
Description Telescoping Range (from mounting hole to mounting hole) Useable Depth of Rack (requires rear rackrail) Pre-Pack Qty
LBFR-1626-T front to rear telescoping lacer bar
16" to 26"
17-3/8" to 27-3/8"
2
LBFR-2036-T front to rear telescoping lacer bar
20" to 36"
21-3/8" to 37-3/8"
2
LBFR-3650-T front to rear telescoping lacer bar
36" to 50"
37-3/8" to 51-3/8"
2
LBH-1930-T horizontal telescoping lacer bar
19" to 30"
20-3/8" to 31-3/8"
2
LBFR-5A-16 front to rear lacer bar (fits AXS racks)
16" only
17-3/8"
2
LBFR-5A-20 front to rear lacer bar (fits AXS, AX-SXR and SLIM 5 racks)
20" only
21-3/8"
2
LBFR-5A-26 front to rear lacer bar (fits AXS and SLIM 5 racks)
26" only
27-3/8"
2
  A complete cable management system, the NEW telescoping lacer bars adjust to fit any Middle Atlantic Products rack.
  Allows vertical and horizontal cable management.
Cable strain relief!

Horizontal Lacer Bars  

The economical and effective way to manage cable horizontally. Made from 1/4" diameter flattened rod (model LBP-1R, LBP-1.5, and model LBP-1R4) or 3/16" thick aluminum (model LBP-1S), each bar provides convenient cable tie points. Model LBP-1R4 features a 4" offset, and model LBP-1.5 features a 1-1/2" offset, for easy viewing of cable identification, while model LBP-1A features a formed "L" shape, generous cable tie slots, and a special coating to protect cables. All lacer bars sold in packs of 10. Black powder coat finish unless otherwise specified above.

Part #
Style Pre-pack Qty
LBP-1R
round rod
10
LBP-1S
rectangular bar
10
LBP-1. 5 NEW!
1. 5" offset round rod
10
LBP-1R4
4" offset round rod
10
LBP-1A
"L" bar
10
LBP-2A
"L" bar, 2" offset
10
LBP-4A
"L" bar, 4 " offset
10
LBP-6A
"L" bar, 6 " offset
10
LBP-1A-23
"L" bar, 23" width
10
LBP-LTF
2 space lacer panel
10

 

Horizontal Cable Managers

  • Available in a variety of styles to suit any application
  • Welded steel construction
  • Finished in durable black powdercoat

#96-337 Download or view PDF file

HCM-1DV, HCM-2D,
HCM-2DV

HCM-1, HCM-1V, HCM-1D

HCM-1DR, HCM-2DR
Part # Description
Panel Width
Cable Rings
(see below)
End Rings
(see below)
HCM-1
1-3/4" (1 space) "micro-clip" style
 19" A -
HCM-1V
1-3/4" (1 space) "micro-clip" style, w/ end rings
 19" A C
HCM-1D
1-3/4" (1 space) "D-Ring" style
 19" B -
HCM-1DV
1-3/4" (1 space) "D-Ring" style, w/ end rings
 19" B C
HCM-2D
3-1/2" (2 space) "D-Ring" style
19" C -
HCM-2DV
3-1/2" (2 space) "D-Ring" style, w/ end rings
 19" C C
HCM-1DR
1-3/4" (1 space) "D-Ring", front and rear
 19" B -
HCM-2DR
3-1/2" (2 space) "D-Ring", front and rear
 19" C -
HCM-1D-23
1-3/4" (1 space) "D-Ring" style, 23" width
23" B -
HCM-2D-23
3-1/2" (2 space) "D-Ring" style, 23" width
 23" C -
D-RING
wall-mount/ rackmount "D-Ring"
 - C -
A
Cabling area: 0.45" sq. Recommended fill rate: 50% CAT5e cable area: 0.03" sq. # of CAT5e cables: 7		 B
Cabling area: 3.125" sq. Recommended fill rate: 50% CAT5e cable area: 0.03" sq. # of CAT5e cables: 50		 C
Cabling area: 7.5" sq. Recommended fill rate: 50% CAT5e cable area: 0.03" sq. # of CAT5e cables: 120

Hinged Horizontal Cable Managers - NEW!

 
  • Dress cables between open frame racks and other enclosures
  • Cable strain relief provides more reliable connections
  • Multiple cable pass-throughs - top, rear, bottom and sides
  • Solid face conceals cables from view
  • Hinged panel allows easy entry for and access to cable bundles

#96-01003 Download or view PDF file


HHCM-2
Part # Racking Height Panel Width Depth
HHCM-1
One rackspace, hinged horizontal cable manager
 19" 3.5"
HHCM-2
Two rackspace, hinged horizontal cable manager
 19" 3.5"



Vertical Lacer Strips
  Perforated steel lacer strips mount vertically to rackrail brackets and provide many locations for securing cable ties. Lacer strips can be cut down easily to smaller sizes.  LACE-OWP and LACE-OP strips feature tie posts for sliding on pre-wrapped cable bundles using cable ties or up to 3/4" wide VelcroŽ straps. Some lacer strips also accept cage nuts or mounting of select power strips for increased versatility.
Part #
Description
Qty
Compatible Options
Cable Ties
TSW-15
TW12
Cage Nuts
LACE-44-OWP* 4-3/4" width, 44 space w/ tie posts
6
LACE-40-OWP* 4-3/4" width, 40 space w/ tie posts
6
LACE-37-OWP* 4-3/4" width, 37 space w/ tie posts
6
LACE-44-OP 3-1/4" width, 44 space w/ tie posts
6
LACE-40-OP 3-1/4" width, 40 space w/ tie posts
6
LACE-37-OP 3-1/4" width, 37 space w/ tie posts
6
LACE-44LP 3-1/2" width, 44 space w/ raised lances
6
-
-
LACE-37LP 3-1/2" width, 37 space w/ raised lances
6
-
-
LACE-P* 2" width, 45 space, 1/8" thick w/ round holes
6
-
-
LACE-37P 2" width, 37 space, 1/8" thick w/ round holes
6
-
-
LACE-44-1SP 1" width, 44 space w/ 10 tie saddles
6
included
-
LACE-37-1SP 1" width, 37 space w/ 10 tie saddles
6
included
-
LACE-44-1P 1" width, 44 space tapped for tie saddles
6
-
-
LACE-37-1P 1" width, 37 space tapped for tie saddles
6
-
-
*NOTE: Also accepts mounting of PD Slim and PDT Series vertical power

NEW TSW-15 tie saddles (qty. 15)

TW12 VelcroŽ cable strap (qty. 12)

LACE-44-OWP

LACE-44-OP

No need to fish in cable ties and straps - just slide them on!
   

LACE-44-1P

LACE-44-1SP
   

LACE-44-LP

LACE-P



Cable Management Pad - NEW!  

Innovative material mounts to OWP Series Lace and reduces weight of cables by 40%!

Part # Qty.
ASP-OWP 4
ASP-OWP-6 24
ASP-OWP ASP-OWP on
LACE-44-OWP


The Brush Grommet Panel  

The brush grommet panels provide a clean, organized cable entry method when used in conjunction with any work surface. Features a built-in cable management tray. Available in 1 and NEW 2 space versions. 2 space brush grommet panel fits in opening on all MW Series top options.

Part # Racking Height
BR1 1-3/4" (1 space)
BR2 3-1/2" (2 space)
 

Cable Management Straps  

Fasten cable bundles securely while maintaining the integrity of the cable. TW12 cable management straps are perfect for managing cables that are sensitive to strain and are 8" long.

Part # Description Qty
TW12 8" cable/wire management straps 12



        

 

Protective Grommet - Updated  

Protect cables with these rubber grommets. The 30 ft. GR030 can be custom cut for any opening. GK4 grommets work with any 4" trade-size electrical knockout and resist cable chafing. The NEW GK-4G gland grommets additionally block dust and help control airflow within an enclosure. 4" grommets are sold in packs of four.


Part # Description Qty
GR-30
grommet, 30 ft. long, fits any material up to 1/8" thick
1
GK4
4" grommet ring
4
GK-4G
4" gland grommet
4


GR-30

   
GK4


GK-4G
 

The Claw  

The unique dual-size "claw" configuration of this versatile wallmount cable hanger provides efficient storage for all cables large and small. Convenient side trays hold small items. 16" wide x 3-1/2" deep, black powder coat finished.

Part #
CLAW
 

Horizontal Cable Tray

 
  • Mounts on any 19" rack
  • Neatly routs cables side-to-side on face of rack
  • Finished in durable black powdercoat
Part # Racking Height
HCT-1
1-3/4" (1space)
HCT-2
3-1/2" (2 space)


HCT-1
 

Utility Panel

Give your drill a rest - our panels are pre-punched with plenty of slots. This economical panel is capable of mounting everything from electrical boxes to power strips. 16-gauge flanged steel construction, black powder coat finish, occupies 1 rackspace (1 3/4").
 
Part #
UP1