|
 |
|
|
| Quiet-Cool
SeriesT Custom Residential Cooling Solutions
|
 |
| |
|
Why is thermostatic control important?
-
Extends equipment life
-
Minimizes noise
-
Reduces service calls
|
 |
|
Thermal management solutions from Middle Atlantic
Products have been designed and engineered to integrate aesthetically into any
residential environment with little to no impact on the client.
Intelligent technology such as thermostatic fan control ensures that
the homeowner's electronics system will run optimally by monitoring system
temperature and signaling fans to run automatically when necessary, benefiting
the client as well as the installer.
|
| COMP-COOL
Component Cooler |
 |
| |
Remove heat right at the
source. Optimized for components on open shelving, this quiet cooler turns on
automatically when satellite/cable boxes, receivers and other heater generating
components get too hot. Place the component cooler directly on top of equipment
vents. The COMP-COOL-3 is available for systems that require multiple
components to be cooled.
The low-profile unit produces minimal noise and fits beneath most
equipment. Rubber discs are included to raise the height of stacked equipment
if necessary.
Click HERE for
more information, features and product dimensions.
|

Power Supply Included
|
|
Part #
|
Description
|
Airflow
|
Noise
(from one meter)
|
Power
|
Voltage
|
|
COMP-COOL
|
Single fan,
low-profile component cooler
|
8 CFM
|
19 dBA
|
7.5 VDC @ 70 mA
|
120V
|
|
COMP-COOL-3
|
Daisy-chained,
low-profile component coolers, set of 3
|
8 CFM
|
24 dBA
|
7.5 VDC @ 210 mA
|
120V
|
|
COMP-COOL-E
|
Additional
component cooler, connects to COMP-COOL-3
|
8 CFM
|
19 dBA
|
7.5 VDC @ 70 mA
|
120V
|
|
ICOMP-COOL*
|
Single fan,
low-profile component cooler
|
8 CFM
|
19 dBA
|
7.5 VDC @ 70 mA
|
220V
|
|
ICOMP-COOL-3*
|
Daisy-chained,
low-profile component coolers, set of 3
|
8 CFM
|
24 dBA
|
7.5 VDC @ 210 mA
|
220V
|
|
ICOMP-COOL-E*
|
Additional
component cooler, connects to COMP-COOL-3
|
8 CFM
|
19 dBA
|
7.5 VDC @ 70 mA
|
220V
|
* Indicates that this product meets CE standards
|
| |
|
| CAB-COOL
Cabinet Cooler |
|
|
|
Remove heat generated by components located in smaller cabinets and
entertainment centers. Operating only when needed to minimize dust, this quiet
cooling device features an aesthetically designed vent that can be painted to
match its environment.
The quiet, internal fan activates automatically when temperatures
generated by hot-running equipment reach damaging levels.
Click HERE for
more information, features and product dimensions.
|

Power Supply Included
|
|
Part #
|
Description
|
Airflow
|
Noise
(from one meter)
|
Power
|
Voltage
|
|
CAB-COOL
|
Single fan, cabinet
cooler
|
20 CFM
|
24 dBA
|
12 VDC @ 100 mA
|
120V
|
|
ICAB-COOL*
|
Single fan, cabinet
cooler
|
20 CFM
|
24 dBA
|
12 VDC @ 100 mA
|
220V
|
|
CAB-COOL-2
|
Double fan, cabinet
cooler
|
40 CFM
|
27 dBA
|
12 VDC @ 100 mA
|
120V
|
|
ICAB-COOL-2*
|
Double fan, cabinet
cooler
|
40 CFM
|
27 dBA
|
12 VDC @ 100 mA
|
220V
|
* Indicates that this product meets CE standards
|
|
|
| CLS-COOL Closet
Cooler |
|
 |
|
Closet cooler removes heat from closets where small rack systems are located. Two solid oak vents will be visible and can be stained or painted to match any room’s décor.
This cooling solution runs only when needed, mounts to closet doors and is available with an active exhaust and passive intake for closets with gaps, or an active exhaust and active intake for tightly sealed closets.
Click HERE for
more information, features and product dimensions.
|

Power Supply Included
|
|
Part #
|
Description
|
Airflow
|
Noise
(from one meter)
|
Power
|
Voltage
|
|
CLS-COOL1
|
A/V closet cooler,
passive intake, active exhaust
|
50 CFM
|
25 dBA
|
12 VDC @ 200 mA
|
120V
|
|
CLS-COOL2
|
A/V closet cooler,
active intake, active exhaust
|
50 CFM
|
28 dBA
|
12 VDC @ 400 mA
|
120V
|
|
ICLS-COOL1*
|
A/V closet cooler,
passive intake, active exhaust
|
50 CFM
|
25 dBA
|
12 VDC @ 200 mA
|
220V
|
|
ICLS-COOL2*
|
A/V closet cooler,
active intake, active exhaust
|
50 CFM
|
28 dBA
|
12 VDC @ 400 mA
|
220V
|
* Indicates that this product meets CE standards
|
|
|
| DUCT COOL Long Pull
Vent System |
|
 |
  |
Duct CoolTM is a long pull vent
system that allows you to manage the heat in closets quietly and effectively.
At the heart of the system is a powerful state-of-the-art mixed flow fan
capable of pulling heated air from up to 25 ft. away.
Duct CoolTM features a temperature probe that allows the unit to run
only when needed, turning on automatically at 88° and turning off at 85°,
further reducing noise. An optional thermostat is offered to provide more
control.
The system can be installed easily to exhaust to an attic or crawlspace. Duct
CoolTM ships as a complete system and includes all of the hardware
necessary for a successful installation.
Includes:
- Air intake
- High powered mixed-flow fan with 9 ft. power cord
- Mounting plate
- 25 ft. of flexible insulated duct
- 30 ft. temperature probe
- Mounting hardware
#96_01091 Download or
view PDF file |
| Part # |
Airflow |
| DUCT-COOL-1PT |
135 CFM |
| DUCT-COOL-2PT |
293 CFM |
|
|
| Part # |
Description |
| THERM-A |
Optional thermostat
(user controlled temperature range from 60° F to 100° F.) |
|
|
|
|
|
|
|
|