|
 |
|
|
|
Custom
Panel System
|
|
|
 |
|
Design and build custom connector panels using off-the-shelf materials! The UCP Series modular custom panel system assembles easily using a chassis or frame kit and a selection of pre-punched modules.
Modules are pre-punched to accept component audio/video, XLR, Neutrik, Elco, Canare and other connector configurations. The inherent strength of the interlocking system eliminates panel deflection while inserting or removing connectors. All hardware sits flush to create a professional appearance with no unsightly gaps. Visible parts have a brushed and black anodized finish.
The fan panel is available for cooling equipment mounted in the frame kit or UCP chassis. Blank and vented panels are available to fill unused spots. |
| Frame
Kits |
|
Bolt modules to
them in any combination
(2 space frame kit shown above)
|
| Part
# |
Racking
Height |
| FK2 |
3 1/2" (2 space)
|
| FK4 |
7" (4 space)
|
|
| UCP
Panels listed below by type |
|
| Keystone Punchouts: Accommodates a variety of connectors including RCA, RJ 11/12/45, F, BNC feedthrough, Banana, ST Fiber, etc. |
|
| |
| Multipin AMP Punchouts: Fits "G" Series Connectors |
click HERE for detailed dimensions
|
 |
|
UNIV1 |
UNIV2 |
UNIV3 |
UNIV4 |
UNIV6 |
|
FORMERLY BOTH
XLRF AND NDL MODULES |
| Universal XLR Female Punchouts - fit
Neutrik FP, MP, MDL, FDL, small Speakon, Switchcraft female XLR’s,
Cannon, Whirlwind (male XLR’s fit as well, but leave a gap
on sides) |
click HERE for detailed dimensions
XLR style male punchouts fit - Neutrik MP, LNEMP, Switchcraft,
Cannon
click HERE for detailed dimensions
 |
|
COMBO2 |
COMBO4 |
COMBO6 |
Combo female/male punchouts - Mix genders within a module
click HERE for detailed dimensions
Circular flange 4 bolt punchouts - fit Cannon AP &
EP, Neutrik NL8MPR, NL4MPR (“Speakon”).
click HERE for detailed dimensions
 |
|
1ELCO38 |
1ELCO56 |
1ELCO90 |
1ELCO120 |
 |
|
2ELCO38 |
2ELCO56 |
2ELCO90 |
Multipin Elco punchouts - for 38, 56, 90 &
120 pin connectors
click HERE for detailed dimensions
 |
| 1W1 |
1W2 |
Multipin whirlwind punchouts - 39 and 61 Pin
click HERE for detailed dimensions
 |
3/8 X 1
|
1/4 X 2
3/8 X 2
|
1/4 X 4
3/8 X 4
7/16 X 4 |
3/8 X 6 |
3/8 X 8 |
1/4” diameter punchouts
- fit RCA jacks, some switches and LED’s.
3/8” diameter punchouts - fit phone jacks, attenuators, “F”
connectors, some switches.
7/16” diameter punchouts - fit Switchcraft
#11, insulated phone jacks, some switches. |
click HERE for detailed dimensions
 |
3/8X5 |
| 3/8” Diameter Punchouts: Fits 3/8” insulated RCA connectors for component video and audio |
click HERE for detailed dimensions
 |
| CANARE 4 |
Canare BNC recessed panel punchouts - fit regular
and feedthrough types
click HERE for detailed dimensions
 |
|
2DL96 |
DL series multipins, by Cannon
click HERE for detailed dimensions
 |
|
1DB9 |
1DB9M |
2DB9 |
3DB9 |
4DB9 |
2DB37 |
 |
|
1DB15 |
2DB15 |
1DB25 |
2DB25 |
2DB50 |
“DB” Style Punchouts: Fits the popular data multipin. 1DB9M fits HD15(SVGA) and additional 1/8” mini phone jack for easy laptop connection.
click HERE for detailed dimensions
 |
| 1/2 BNC1 |
1/2 BNC2 |
1/2 BNC3 |
3/8 BNC4
1/2 BNC4 |
| BNC punchouts - fit 1/2" & 3/8"diameter
BNC shells, most insulated shells and fuses. |
click HERE for detailed dimensions
 |
1/2BNC5 |
| 1/2" Diameter “D” Punchouts: Fits ½” insulated BNC connectors for RGBHV |
click HERE for detailed dimensions
| Twistlock punchouts - oval mounting hole
pattern fits most brands (Hubbel Bryant, etc.) Use Part # TW2B
for 2 bolt twistlocks & other 2 bolt devices. Use Part # TW3B
for 3 bolt twistlocks. |
click HERE for detailed dimensions
|
|
|
| DUP1 |
DUP2 |
|
|
DUP - duplex receptacle
punchouts
removal of receptacle ears is necessary to fit between UCP bars
|
click HERE for detailed dimensions
NOTE: For low voltage applications only
Socapex 19 pin
click HERE for detailed dimensions
 |
|
BANA2 |
BANA4 |
BANA6 |
BANA Punchouts: Fits dual banana jack receptacles requiring 1/2" hole
click HERE for detailed dimensions
|
|
|
3/8BANA2 |
3/8BANA4 |
3/8BANA6 |
3/8" BANA Punchouts: Fits dual banana jack receptacles requiring up to 3/8" hole
click HERE for detailed dimensions
Vent module - fills unused spaces while providing ventilation
click HERE for detailed dimensions
Blank Module - available for filling unused spots or
drill your own connector mounting pattern
click HERE for detailed dimensions
|
| UCP-FAN |
 |
 |
Extend equipment life by removing heat from within an enclosure. UCP-FAN operates on 12VDC using integral 12” long pigtail leads, includes power supply.
.
| Part # |
Free Air dB Rating |
Free Air CFM |
| UCP-FAN |
25 dBA |
15 |
click HERE for detailed dimensions |
UCP-FAN
|
| |
|
UCP-FAN installed in UCP-CH chassis |
UCP-FAN installed in FK2 frame kit |
|
|
|
|
|
|
