Shipping Impact:
Upcoming holiday hours. Click for the latest.
Rackmount Power/Cooling, 10 Outlet, 15A, 2-Stage Surge
Combines power distribution and cooling in one space package
Loading Prices...
Add to Materials
Sorry! That combination does not exist.
General Info
Cable Type: Removable
Finish: Black Brushed and Anodized
UL Standards Tested: UL60950
Termination: 5-15P
Surge Protected: 2-Stage
Assembly/Installation Information
Mounting Points: 2
Listing Agencies/Third Party Certifications
RoHS: Yes
Greenguard: Yes
CFM: 50
Depth (US): 13.7
Height (US): 1.75
Width (US): 19
Rack Units: 1
Cord Information
Cord Length US: 6
Technical Information
Amps: 15
Material: Aluminum
Mounting: Horizontal
Volts: 120
Number Of Circuits: 1
Number Of Outlets: 10
This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
EIA compliant 19” PowerCool™ Rackmount power distribution and cooling unit shall be Middle Atlantic Products model # PDCOOL-1015RA, with a 15 amp capacity, 2 stage, normal mode (Line to Neutral) spike and surge suppression with dry contact and LED status indicators and EMI filtering. PowerCool shall activate at 87°F (30.5°C), reach full speed at 95°F (35°C) and switch off at 85°F (29.4°C). PowerCool shall displace 50 CFM with a maximum decibel level of 29 dB (measurements made 1 meter from source, centered horizontally and vertically). PowerCool shall operate at a static pressure of .031 in. H20. PowerCool shall have a removable 10” temperature probe. PowerCool shall have a normally open contact closure for remote surge suppression status notification to customer supplied monitoring device shall operate on 120 volt AC/60Hz nominal power. PowerCool shall have a removable 6’ 15A (14-3) IEC SignalSAFE™ power cord with IEC C-14 receptacle. PowerCool shall have 0 front and 10 NEMA 5-15R outlets, and shall be always on. “Clean ground” surge suppressor design shall not pass noise contamination to the ground. PowerCool shall occupy one rackspace with a black brushed and anodized finish. PowerCool shall comply with the requirements of RoHS EU Directive 2002/95/EC. PowerCool shall be manufactured by an ISO 9001 registered company. PowerCool shall be warrantied to be free from defects in materials and workmanship under normal use and conditions for a period of 3 years. PowerCool shall be ETL listed to UL standard 60950 in the US and CAN/CSA C22.2 #60065 in Canada.