Rackmount Power/Cooling, 11 Outlet, 15A, 2-Stage Surge
Combines power distribution and cooling in one space package
MSRP
Loading Prices...
Qty
Add to Materials
Sorry! That combination does not exist.
Specifications
General Info
Cable Type: Removable
Finish: Flat Black
UL Standards Tested: UL60950
Termination: 5-15P
Surge Protected: 2-Stage
Assembly/Installation Information
Mounting Points: 2
Listing Agencies/Third Party Certifications
RoHS: Yes
Greenguard: Yes
Dimensions
CFM: 50
Depth (US): 14.2
Height (US): 1.75
Width (US): 19
Rack Units: 1
Cord Information
Cord Length US: 6
Technical Information
Amps: 15
Material: Aluminum
Mounting: Horizontal
Volts: 120
Number Of Circuits: 1
Number Of Outlets: 11
Eco-Benefit Information
RoHS Compliant
RoHS_Compliant
EIA compliant 19” PowerCool™ Rackmount power distribution and cooling unit shall be Middle Atlantic Products model # PDCOOL-1115R, with a 15 amp capacity, 2 stage, normal mode (Line to Neutral) spike and surge suppression with dry contact and LED status indicators and EMI filtering. PowerCool shall activate at 87°F (30.5°C), reach full speed at 95°F (35°C) and switch off at 85°F (29.4°C). PowerCool shall displace 50 CFM with a maximum decibel level of 29 dB (measurements made 1 meter from source, centered horizontally and vertically). PowerCool shall operate at a static pressure of .031 in. H20. PowerCool shall have a removable 10” temperature probe. PowerCool shall have a normally open contact closure for remote surge suppression status notification to customer supplied monitoring device shall operate on 120 volt AC/60Hz nominal power. PowerCool shall have a removable 6’ 15A (14-3) IEC SignalSAFE™ power cord with IEC C-14 receptacle. PowerCool shall have 1 front and 10 NEMA 5-15R outlets, and circuit breaker switch with switch guard located on the front of the unit. “Clean ground” surge suppressor design shall not pass noise contamination to the ground. PowerCool shall occupy one rackspace with a flat black finish. PowerCool shall comply with the requirements of RoHS EU Directive 2002/95/EC. PowerCool shall be manufactured by an ISO 9001 registered company. PowerCool shall be warrantied to be free from defects in materials and workmanship under normal use and conditions for a period of 3 years. PowerCool shall be ETL listed to UL standard 60950 in the US and CAN/CSA C22.2 #60065 in Canada.