USC Universal Sequencing Controller, 1 Space Sequencing Controller
Provides 6-step sequencing to MPR remote power modules
Loading Prices...
Add to Materials
Sorry! That combination does not exist.
General Info
Cable Type: Corded
Finish: Black Powder Coat
Termination: 5-15P
Assembly/Installation Information
Mounting Points: 2
Listing Agencies/Third Party Certifications
RoHS: Yes
Greenguard: Yes
Depth (US): 9
Height (US): 1.75
Width (US): 19
Rack Units: 1
Cord Information
Cord Length US: 9
Technical Information
Amps: 15
Material: Steel
Mounting: Horizontal
Number Of Circuits: 1
This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
One rackspace universal sequencing controller shall be Middle Atlantic Products model # USC-6R. Sequencing up and down shall be controlled locally via integral front system switch with switchguard or remotely via single pole, double throw, center off, momentary switch. The USC-6R shall include 9’ 15A (14-3) SignalSAFE™ power cord with NEMA 5-15 plug. A rear mounted, three-position (up, common, down) terminal block shall accept connection of remotely controlled switch. Six yellow LED lights shall indicate channel status. One green LED light shall indicate power status. Remote status indication shall be connected via RJ-45 on the rear of the unit. The USC-6R shall accept daisy-chaining of up to three units to provide a maximum 18 channels of sequencing. A start delay switch on the rear of the unit shall facilitate programming of the daisy-chained, sequencing function. An interval delay switch shall adjust the sequencing interval to 1, 3 or 6 seconds between steps. Six controlling outputs shall be 12 VDC and/or dry relay contact closure. Each USC-6R shall be capable of controlling up to 12 modules. The USC-6R shall include a permanently installed supplementary grounding and bonding stud located on the rear. The USC-6R shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. The USC-6R shall comply with the requirements of RoHS EU Directive 2002/95/EC. The USC-6R shall be manufactured by ISO 9001 registered company. The USC-6R shall be warrantied to be free from defects in material and workmanship under normal use and conditions for a period of 3 years. USC-6R shall be ETL listed to UL standard 1419, UL 60950-1 and UL 60065 in the US; CSA standard 60950-1, and CSA C22.2 No. 60065 in Canada.