Rackmount isolation transformer and load center system
Loading Prices...
Add to Materials
Sorry! That combination does not exist.
General Info
Cable Type: Corded
Finish: Black Powder Coat
UL Standards Tested: 1012
Termination: L6-30P
Assembly/Installation Information
Mounting Points: 4
Listing Agencies/Third Party Certifications
Greenguard: Yes
Mounting Depth Max: 24.8
Mounting Depth Min: 17.8
Depth (US): 14.4
Height (US): 6.97
Width (US): 19
Rack Units: 4
Cord Information
Cord Length US: 10
Technical Information
Amps: 20
Mounting: Horizontal
Volts: 208
Number Of Outlets: 18
EIA compliant IsoCenter™ Isolation Transformer shall be Middle Atlantic Products model # ISOCTR-5R-208-NS with 208 input voltages and 5KVA of power with a new separately derived neutral ground bond point. The IsoCenter unit shall be controlled by a main circuit breaker located in the front of the unit which will disconnect all primary power to the transformer. The isolation transformer shall have a Faraday shield to attenuate common-mode noise. The IsoCenter shall have less than 250 milligauss magnetic field measured at the chassis. The IsoCenter shall produce no more than 27dB of acoustic noise. The IsoCenter unit shall control all circuits via four 20A breakers in a load center located in the front panel and contain an LED indicator for input voltage monitoring status. The monitoring circuits shall be equipped to shut down all outputs if the input voltage is compromised. When the input voltage returns back to normal operation the auto function shall restore the receptacles to a normal condition. The IsoCenter unit shall be provided with a 10’ 30A power cord and a NEMA L6-30P twist-lock molded male plug. There shall be 9 specification grade gray NEMA 5-20R 20 Amp duplex receptacles on the back of the unit for power distribution as well as a low impedance ground bus for rack enclosure grounding, connected equipment and local grounding electrical conductor. Unit shall measure 19"W x 7"H x 14.4"D and occupy 4 rackspaces. Unit shall have a rear mounting range of 17.8" to 24.8". The IsoCenter shall weigh 105 lbs. net. IsoCenter unit shall be ETL Listed to UL standard 1012 in the US and to CAN/CSA C22.2#107.1 in Canada. The IsoCenter unit shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. The IsoCenter unit shall be RoHS EU Directive 2002/95/EC compliant. The IsoCenter unit shall be manufactured by an ISO 9001 and ISO 14001 registered company. The IsoCenter unit shall be warrantied to be free from defects in material and workmanship under normal use and conditions for a period of 5 years.