WR-44-32-APP1

WR-44-32-APP2

WR Series Rack, WR-24-32

WR-24-32

The WR Series was designed to provide rear access for equipment even when the equipment bays are placed up against a wall or back to back. Factory-assembled in its own host enclosure, the rack frame pulls out and rotates for service access. Specify a WR Series enclosure when easy access to rear equipment connections is required for larger audio, video and security equipment installations but an access aisle is not practical.

Add to Materials List

Loading prices         loading

Features

  • Host enclosure can be pre-installed on-site
  • Detachable rack frame can be integrated with equipment and tested off-site
  • Requires no additional accessories to roll out and rotate
  • Engineered ventilation is optimized for passive thermal management
  • Rack frame features built-in cable management tie points
  • 4” laser knockouts provided for cable pass-through and ganging multiple racks
  • Standard front and rear 10-32 threaded rackrail with marked spaces

Key Specifications

General Info

finish: Textured Black Powder Coat

UL Standards Tested: UL2416

Listing Agencies/Third Party Information

RoHS: Yes

Greenguard: Yes

UL Listing No: E313734

Dimensions

Usable Depth: 26

Usable Height: 42

Capacity Weight U S: 750

Depth U S: 32.875

Height U S: 53.85

Width U S: 24

Primary Package Weight U S: 360

Rack Units: 24

Technical Information

Rackrail Type: 10-32

U L Load Capacity: 750

Material: Steel

Mounting: Horizontal

EIA compliant 19” roll out rotating system in steel host enclosure shall be Middle Atlantic Products model # WR-24-32. Overall dimensions shall be 24” W x 53.84” H x 32-7/8” D. Rotating design of rack allows enhanced access to rear equipment connections, simplifying wiring. Rack will have a 26” useable depth and the rack frame shall be housed in a 32-7/8” depth host enclosure. Rack shall be of fully welded construction. Weight capacity shall be 750 lbs. when 1/2 of total equipment weight is mounted in lower 1/3 of the rack. Rack shall be constructed of the following materials: top and bottom (rack and outer frame) and roller carriage shall be 14-gauge steel; side panel and horizontal braces shall be 16-gauge steel. Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Rack shall have removable split rear knockout panels with 1/2”, 3/4”, 1” & 1-1/2” electrical knockouts installed in base and removable split rear knockout panels with 1/2”, 3/4”, 1” & 1-1/2” electrical knockouts and BNC knockouts for UHF / VHF antennae installed in top. Knockouts on sides to accommodate 4” electrical conduit and cable pass-through. Detachable rack frame allows for off-site integration. Roll out frame ships installed in rack. Rack shall be UL Listed in the US and Canada. Rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall be RoHS EU Directive 2002/95/EC compliant. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in material or workmanship under normal use and conditions for a period of three years.

Resources

3-Part CSI MasterFormat Spec

WR Series Roll Out Rotating System in Steel Host Enclosure 3 Part Spec DOC (48.5 KB)

3D CAD

WR Series Roll Out Rotating System in Steel Host Enclosure 3D CAD Drawing ZIP (10.3 MB)

Revit Models

WR Series Roll Out Rotating System in Steel Host Enclosure ZIP (557.8 KB)

CAD Technical Specification Drawings

WR Series Roll Out Rotating System in Steel Host Enclosure CAD Drawing ZIP (4.3 MB)

A&E

WR Series Roll Out Rotating System 96_01005_Spec PDF (120.1 KB)

Instruction Sheet

INST,WR SERIES PDF (3.5 MB)

INST,WR UNPACKING INSTRUCTIONS PDF (4.9 MB)

Compatible Products